Tuesday, December 31, 2013

Building a battery shelf

Is there a better way to finish out a year than finding an excuse to use the table saw?  Well probably, but anyway...  Today's task was to build a small shelf to hold a few rechargable tool batteries.

There is not much to detail on the process.  I used a scrap piece of 3/4 plywood, cut it to dimensions, routed/sanded the edges, and joined with 3" angle brackets.  I also tie-zipped a power strip to the shelf in order to make easy work of the wiring.  see below for photos...





No comments:

Post a Comment