Root 3 CNC - Adding the Y-Axis Panel Spacer

Relevant official documentation can be found at: https://rootcnc.com/machines/root-3/animated-assembly

• Root 3 Y-Axis Gantry Wooden Panel

For each spacer, the following parts were used (repeat for each side):

• 2x 3D Printed Parts
• 2x M8 x 75mm bolt (1.25mm threads)
• 6x 608zz type bearings
• 2x M8 nylon lock nuts
• 6x M8 washers

The spacer mounts onto the panel on the same side as the box carriage.